[ ADAMLAB ] [ HEALTH-O-METER ] [ METTLER ] [ MYWEIGH ] [ OHAUS ] [ SARTORIUS ] [ SECA ] [ SCIENTECH ] [ SILTEC ]


Calibration procedure for:

Ashiba Brand Pocket Scales Calibration Procedure for 1621 and 1622:
  1. Press the On/Tare button to turn on the scale.
    The LCD will illuminate all segments (0.0.0.0)

  2. "0.0" should be displayed indicating no mass should be on the platform.

  3. Press and hold On/Tare until "1111" is displayed

  4. When On/Tare is released "2222" will be displayed indicating you should place the 100 gram calibration mass on the center of the platform.
    NOTE: Do not disturb the scale after placing the mass on the platform.
    Disturbances will result in improper calibration.

  5. The scale will display "3333" and then automatically shutoff.

  6. Remove the mass from the platform

  7. Press the On/Tare button again and it should display "0.0"

  8. Congratulations those are all the steps.  Your Ashiba 1621/1622 scale should now be calibrated properly.

Ashiba Brand Pocket Scales Calibration Procedure for 1626:
  1. Press the On/Tare button to turn on the scale.
    The LCD will illuminate all segments (0.0.0.0)

  2. "0.0" should be displayed indicating no mass should be on the platform.

  3. Press and hold On/Tare until "1111" is displayed

  4. When On/Tare is released "2222" will be displayed indicating you should place the 500 gram calibration mass on the center of the platform.
    NOTE: Do not disturb the scale after placing the mass on the platform.  Disturbances will result in improper calibration.

  5. The scale will display "3333" and then automatically shutoff.

  6. Remove the mass from the platform

  7. Press the On/Tare button again and it should display "0.0"

  8. Congratulations those are all the steps.  Your Ashiba 1626 scale should now be calibrated properly.

Ashiba Brand Pocket Scales Calibration Procedure for 1625:
  1. Press the On/Tare button to turn on the scale.
    The LCD will illuminate all segments (0.0.0.0)

  2. "0.0" should be displayed indicating no mass should be on the platform.

  3. Press and hold On/Tare until "1111" is displayed

  4. When On/Tare is released "2222" will be displayed indicating you should place the 200 gram calibration mass on the center of the platform.
    NOTE: Do not disturb the scale after placing the mass on the platform. Disturbances will result in improper calibration.

  5. The scale will display "3333" and then automatically shutoff.

  6. Remove the mass from the platform

  7. Press the On/Tare button again and it should display "0.0"

  8. Congratulations those are all the steps.  Your Ashiba 1625 scale should now be calibrated properly.


See the full line of Ashiba mini scale here.

Precision Weighing Balances
30 South Cross Road
Bradford, MA
01835-8232

PHONE: 978-521-7095
FAX: 978-374-5568


https://scalenet.com/ashiba